Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manual de usuario descargar pdf (Pagina 82)



Using the strobe sengs, will allow you to play with the refresh rate of

an input. You will have access to cursors, one per layer.

Each cursor represents one layer. Increasing the cursor level, you will

perform a strobing eect on the specied layer. At the boom of each

cursor, a stop buon allows you to stop immediately the eect.

7.4.4 Layer selecon and nave background



The mirror buon allows you to dene for each layer the way it will be

mirrored from one Screen to another Screen. You can choose to mirror

the layer, ip the posion, or ip the posion and the data from another

screen. To access this feature, you rst need to be in a hybrid conguraon

with 2, 3 or 4 Programs (see chapter: 7.3.4 Screens), then into the Setup

assistant, you need to acvate the “screen mirroring”.

 the mirroring feature can only be used from one screen to another.

It cannot be used to mirror the same content on the same screen.



The Faders toolbar allows you to congure a semi-permanent

transparency override to specic layers. This transparency will be in

eect regardless of the congured layer transparency, unl restored

in the Faders toolbar.

Under each layer transparency cursor you have an automac

increase/decrease transparency buon which fades in or out your

layer to the selected transparency.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 117 118

Sin comentarios

Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manual de usuario Pagina 82