Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manual de usuario descargar pdf (Pagina 69)

7.3.17 Control management

Network

The web interface loaded into the unit uses the IP conguraon.

Under INTERFACE, you can dene a new:

- IP address

- Netmask

- Gateway

- Port: Choose the port

- Protocol: Choose TCP (by default) or UDP

Choose DHCP if you want an automac IP address assignment.

Under the Web RCS feature, you can dene the communcaon port for third party control applicaons to

use. You also have an indicaon on the number of connected devices.

For any informaon about the Third Party Protocol, please see chapter: 9. Addional Remote Control Systems.



The emergency presets allow you the recall quickly some Master Memo-

ries (see chapter: 7.5 Live / Master memories). You have the possibility

to have up to 4 emergency memories. Please enable the feature then

choose for each line a master memory which will be recalled in case of

problem.

By enabling the emergency memories, some new buons will appear into

the live edion:

If you click on A B C or D, it will recall automacally the MM1 MM2 MM3 or MM4 on the main

screen.



The EDID manager is composed of three parts: the Outputs EDIDs, the EDID Library and Inputs EDID Sengs.

The Outputs EDIDs is made to read EDIDs sent by video projectors or monitors in order to enable them to

be saved. EDIDs can be refreshed, one by one or all together. These EDIDs can be saved into the EDID Library

with a simple drag’n drop in the EDID Library. In the Library, the ten rst EDIDs are defaults EDIDs ; it can’t

be modied; the protecon is symbolized by a lock. The twenty-two others can be either uploaded from a

computer or saved from Outputs EDIDs.

7.3.17 Control management

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 117 118

Sin comentarios

Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manual de usuario Pagina 69