Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manual de usuario descargar pdf (Pagina 53)

Choose the value of the icker lter to

remove the icker eect on your interlaced output

screen.

 Increase or decrease the gamma of your

output.

Enable/disable and see the HDCP status*

 Enable/disable and see the op-

cal status

Depending on the output format currently selected, all sengs might not appear.

*The aim of disable the HDCP is to reduce possible problems when the chain isn’t fully HDCP compliant. By disable the output HDCP,

HDCP inputs will not be displayed anymore.

7.3.10 Input management

Once your outputs are congured, you have now to congure the inputs connected to your LiveCore™ unit.

Under the inputs secon, you can view your inputs or by all plugs (acve and inacve).

7.3.10 Input management

All plugs view for 4K devices

In both cases, an AUTOSET ALL can be launched to

set up automacally your inputs.

Once the AUTOSET ALL is done, you can check each

of the inputs and see if they were well detected

using the input STATUS. The input STATUS is dened

by a FORMAT and a SIZE. If that informaon is not

available, your input has not been well detected or

set up.

In this case, you can manually enter into each

input sengs by using the le menu:

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 117 118

Sin comentarios

Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manual de usuario Pagina 53