Analog-way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual Manual de usuario Pagina 109

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 108
109
12.1 HDCP
12. APPLICATIONS NOTE AND TIPS
HDCP is a content protecon mechanism which uses encrpyon to prevent high value content from being
delivered to non-authorized devices. For example, Blu-ray players use HDCP on their HDMI outputs to ensure
that the HDMI output cannot be routed to a digital recording device.
LiveCore™ unit is fully HDCP compliant, meaning that you will be able to use the LiveCore™ unit to accept
HDCP protected sources and route them to any HDCP protected outputs. As Analog Way is a licenced HDCP
adaptor, this also means that the LiveCore™ unit is prevented from displaying any HDCP protected images on
any non-HDCP compliant outputs (as is the case for all licenced HDCP compliant devices).
HDCP can only be used on certain connecon formats, including DVI, HDMI, and DisplayPort. Keep in mind
that simply because a connecon is using a DVI, HDMI, or DisplayPort connecon, it does not gaurentee
that the devices connected are maintaining an acve HDCP connecon. For example, you may nd video
recording or capture devices equipped with an HDMI input, however HDCP licencing forbids these devices
from capturing HDCP protected content.
HDCP is not supported on connecon formats such as composite, component, Svideo, SD-SDI, HD-SDI,
3G-SDI, or VGA. This means that any source which becomes protected by HDCP cannot be converted to
these formats. For example, while you may nd a Blu-ray player which can directly output a composite video
signal, HDCP licencing forbids converng the HDCP protected HDMI signal back to composite or any other
non-protected format.
To help troubleshoot HDCP in your installaon, LiveCore™ unit oers a convenient HDCP map as well as HDCP
status informaon. To access the HDCP map, use the Web RCS and navigate to the SETUP > CONTROL > HDCP
Map page. Each input and output page is also equiped with HDCP status informaon to indicate in realme
when HDCP encrypon is being used.
Certain devices such as Macintosh computers can be parcularly tricky to use in conjuncon with an HDCP
compliant presentaon switcher such as the LiveCore™ unit. This is because devices like the Mac computers
can be used to output both HDCP protected content (such as a movie downloaded from iTunes) as well as
non-HDCP protected content (such as a Keynote presentaon or the desktop).
When a computer rst connects to an HDCP compliant device such as the LiveCore™ unit, it learns the
capabilies of the device through the EDID connecon. Upon seeing the HDCP compability of the aached
LiveCore™ unit, devices like the Mac computers will immediately aempt to use HDCP encrpyon at all
mes, despite the content currently displayed on the computer screen.
Since this source would now be considered as an HDCP protected source, LiveCore™ unit would be required to
prevent it from being displayed on VGA or SDI outputs and only allow it to be displayed on outputs protected
by HDCP. To work around this problem, LiveCore™ unit allows the HDCP features of a parcular input to be
disabled, which in turn informs the Mac computer to avoid using HDCP, and allows content such as Keynote
and the desktop to be displayed, as this input will no longer use HDCP protecon.
Please note that disabling the HDCP features of the input do not circumvent HDCP protecons, and thus do
not allow you to view any content which requires this protecon.
For more informaon about HDCP, please refer to our whitepapers on HDCP, or visit the HDCP foundaon
website.
12.1 HDCP
Vista de pagina 108
1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 117 118

Comentarios a estos manuales

Sin comentarios