Analog-way Octo Fade - OFD802 Manual de usuario descargar pdf (Pagina 36)

Chapter 9 : REMOTE CONTROL PROGRAMMER'S GUIDE (continued) OCTO range

PAGE 36

9-4. COMMANDS AND RESPONSES TABLE (continued)

ASCII RESPONSE COMMAND TYPE VALUE

COMMAND DESCRIPTION MIN MAX DESCRIPTION

FRAME & LOGOS COMMANDS (OCTO-LOGO

™

& OCTO-FX

™

only)

PC PCH Input selection for adjustment. Rd/Wr 0 8

0 = All inputs 1 = INPUT #1

2 = INPUT #2................ 8 = INPUT #8

** LM LMOD Frame/logo mode. Rd/Wr 0 4

0 = use & assignment mode.

1 = logo recording mode.

2 = frame recording mode.

3 = auto list mode (display all logo parameters).

4 = erasing mode.

** LI LIND Index selection (according to PCH) . Rd/Wr 0 1 0 = index 1 1 = index 2

** LP LPLG

Logo & frame assignment (according to

PCH & LIND. And LMOD = 0).

Rd/Wr 0 1

0 = none 1 = frame

2 = logo 1................... 9 = logo 8

** LC LCUR

• In use mode: Logo/frame in using

process.

• In logo recording mode: Number of

the logo to be store (always >1).

• In frame recording mode: Number of

the frame to be store (always = 1).

• In erase mode: number of the logo to

be erase (0 = erase all).

Rd/Wr 0 9

0 = no logo

1 = frame

2 = logo 1

3 = logo 2

4 = logo 3

5 = logo 4

....

9 = logo 8

** LE LEMP

Status of the frame/logo memories

(according to LCUR).

0 1

0 = logo/frame memorized.

1 = empty memory.

** Lh LHPO Horizontal position of the logo area. Rd/Wr 0 255

** Lv LVPO Vertical position of the logo area. Rd/Wr 0 255

** LH LHSZ Horizontal size of the logo area. Rd/Wr 5 255 5 = 3% 255 = 100%

** LV LVSZ Vertical size of the logo area. Rd/Wr 5 255 5 = 3% 255 = 100%

** LL LLEV Luma key level. Rd/Wr 0 255

** Lb LBKC Background color. Rd/Wr 0 7

** LS LSTO

• In recording mode: frame/logo storing.

• In erase mode: frame/logo erasing.

0 1 1 = STORE or ERASE (automatic reset).

** Lo LOFM Output format during the logo storing.

0 11 Identical as F command.

** LA LABT Stop the frame storing. Rd/Wr 0 1 1 = stop the frame storing (automatic reset).

** Lt LSTY Frame/logo type.

0 1 0 = frame 1 = logo

** Ls LSTA Status of the logo programmer

0 5

0 = free.

1 = logo/frame in recalling process.

2 = logo/frame in storing process.

3 = output format incompatible with the logo.

4 = logo/frame in consulting process.

5 = logo/frame in erasing process.

** Lp LPIX Pixels number in a line of the logo area.

0 65535

** Ll LLIN Lines number in a logo area.

0 65535

These 2 commands allow to calculate the

duration of the storing.

** Ld LLD Fade logo duration (0.02 second step). Rd/Wr 15 255 15 = 0.3 second 255 = 5.1 seconds

** LD LDYS Display logo (according to PCH) Rd/Wr 0 1 0 = Display OFF 1 = Display ON

NOTE:

To store a logo you should:

c Select the logo recording mode with the LM command (1LM).

d Adjust the position and size of the logo area with the Lh, Lv, LH and LV commands.

e Adjust the luma key level (with LL command) and the background color (with Lb command).

f Select a logo memory with the LC command.

g Make a store with LS command (1LS).

To store a frame you should:

c Select the frame recording mode with the LM command (2LM).

d Make a store with the LS command (1LS).

NOTE:

To assign a logo/frame to an input you should:

c Select the assignment mode with the LM command (0LM).

d Select the input with the PC command.

e Select an index (1 or 2) with the LI command.

f Select a stored logo/frame with LP command.

g Adjust the horizontal & vertical position of the logo with the Lh & Lv commands.

NOTE:

* = command available on the OCTO-FADE

™

& OCTO-FX

™

only. Rd = Read only command.

** = command available on the OCTO-LOGO

™

& OCTO-FX

™

only. Rd/Wr = Read and write command.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Comentarios a estos manuales

Sin comentarios

Analog-way Octo Fade - OFD802 Manual de usuario Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Audio Analog-way Octo Fade - OFD802