Analog-way Octo Fade - OFD802 Manual de usuario descargar pdf (Pagina 28)

OCTO range

PAGE 28

Chapter 7 : UPDATING THE DEVICE

The OCTO can be updated thanks a COMPUTER (PC) via its RS-232 communication port only.

7-1. CONNECTIONS

c Connect the "RS-232" connector of the OCTO to the SERIAL port of your COMPUTER with a DB9 M/F straight

cable.

d Connect the OCTO to an AC power outlet.

e Switch OFF the OCTO (FRONT PANEL SWITCH = O).

7-2. UPDATE INSTRUCTIONS

c Open the file: Octo-Range-Update.exe (in Start > Program > ANALOGWAY > Octo-Range).

d In the Port menu select the COM port connected to the device.

e Click on "START" on the SOFTWARE.

f Press the ENTER button of the OCTO (FRONT PANEL), and SWITCH it ON simultaneously (FRONT PANEL

SWITCH = I ). The LCD screen displays Downloading, and the upgrade will start. Then you can release the ENTER

button.

g When the software displays "Program operation completed", SWITCH OFF and ON the OCTO with the FRONT

PANEL SWITCH.

h Click on the "Quit" button to close the update SOFTWARE.

NOTE:

YOUR OCTO IS NOW READY TO WORK.

NOTE:

If the "BAD TYPE DEVICE" message appears, selects the devices type in the Device menu, and renew the

previous operations (e to h).

NOTE:

THE UPDATER FILES ARE AVAILABLE ON OUR WEB SITE: www.analogway.com

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 83 84

Sin comentarios

Analog-way Octo Fade - OFD802 Manual de usuario Pagina 28