Analog-way Octo Fade - OFD802 Manual de usuario descargar pdf (Pagina 24)

Chapter 6 : LCD FUNCTIONS DESCRIPTION (continued) OCTO range

PAGE 24

6 [LOGOS/FRAME] + ENTER (available on the OCTO-LOGO

™

and the OCTO-FX

™

only).

6-1 [use logo/frame] + ENTER.

Select an item with  + ENTER.

6-1-1 [display] + ENTER.

This function allows to display ON or OFF the assigned logos of each input. Select an input with  and

press ENTER to display ON or OFF.

NOTE

: To display a logo or a frame, the output format should be the same that the output format used

during the storing.

6-1-2 [assignment] + ENTER.

This function allows assigning the stored frame and the logos to the inputs of the OCTO-LOGO

™

(up to 2

logos at the same time).

c Select an input with  + ENTER.

d Select the INDEX 1 or the INDEX 2 with  + ENTER.

e Then select a logo, frame or none with  + ENTER.

f Adjust the logo position with H& V position functions.

6-1-3 [fade duration] + ENTER.

This function allows adjusting the fade duration of the logo when you display ON or OFF a logo. Adjust the

duration with  and validate with ENTER.

6-2 [record logo] + ENTER.

This mode allows storing up to 8 logos in order to incrust them into the displayed image (up to 2 logos at a same

time). Select an item with  + ENTER.

6-2-1 [H position] + ENTER.

Adjust the Horizontal position of the logo area with  + ENTER.

6-2-2 [V position] + ENTER.

Adjust the Vertical position of the logo area with  + ENTER.

6-2-3 [H size] + ENTER.

Adjust the Horizontal size of the logo area with  + ENTER.

6-2-4 [V size] + ENTER.

Adjust the Vertical size of the logo area with  + ENTER.

NOTE

: The logo area is limited at an eighth (1/8) of the displayed area.

6-2-5 [luma key level] + ENTER.

This function allows to "erase" the darkest portions of your logo area in order to make special logo contour.

Adjust the luma key level with  + ENTER.

6-2-6 [back. color] + ENTER.

This function allows coloring the "erased portions" of the logo when using the luma key. Select a level with

 + ENTER.

6-2-7 [store] + ENTER.

This function allows storing the logo into one of the 8 memories. Select a logo memory with  +

ENTER. The memorization will take few seconds.

6-3 [record frame] + ENTER.

This mode allows storing a frame in order to display it at any time during the show.

6-3-1 [store]

This function allows storing the displayed image (frame) into a memory. Presses ENTER to start the

memorization of the frame. The memorization will take about 2 minutes.

6-4 [erase mode] + ENTER.

This function allows erasing the memorized frame and/or the logos. Select an item with  + ENTER.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

Comentarios a estos manuales

Sin comentarios

Analog-way Octo Fade - OFD802 Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Audio Analog-way Octo Fade - OFD802