Analog way Axion2 Manual de usuario descargar pdf (Pagina 25)

AXION Chapter 3 : HOW TO SET A SOFTEDGE SCREEN WITH TWO DEVICES (continued)

PAGE 25

3-2. PROJECTORS CONFIGURATION (continued)

• Press the Covering touchscreen button and set the Covering adjustment so that the test pattern overlaps each other at the

junctions of the projectors.

NOTE: Verify that the Softedge is disabling.

• Press the Patterns touchscreen button and turn OFF the test pattern: The covering area will appear brighter than the non-

covering areas.

• Press the Black touchscreen button to display the Black functions.

-First, you need to adjust the 2 non-covering areas to obtain a uniform dark grey on the entire screen: Select a device and

press ALL (to adjust the 3 colors in the same time) and adjust the Black level. As required, you can also separately adjust

the colors of each projector with the Red (R), Green (G) & Bleu (B) adjustments. Two white lines will appear at the

junctions of the covering areas.

-Then Use the Black start (mixer right) and Black end (mixer left) functions to remove the 2 white lines. A uniform dark

grey image is then displayed.

Uniform projected image.

Example: Test pattern in horizontal SE configuration.

White lines

Projected image (after black level adjustment)

Covering

area

Projected image (before black level adjustment)

1 2 ... 20 21 22 23 24 25 26 27 28 29

Sin comentarios

Analog way Axion2 Manual de usuario Pagina 25