Analog-way Smart Fade - SMF251A Manual de usuario descargar pdf (Pagina 12)

Chapter 4 : STARTING SMART FADE™

PAGE 12

4-6. DISPLAY OUTPUT

The SMART FADE

™

is equipped with a 5 BNC connectors output. If your display device is equipped with an HD 15

connector : use the supplied BNC to HD 15 cable (See connection schematic below).

The SMART FADE

™

can provide an RGBHV (H & V Separate Sync.) or an RGB/S (Composite Sync.) output signal. If

your display device only accepts Composite Sync., connect the C.SYNC. cable to the H BNC of the SMART FADE

™

and

select COMP (Composite Sync.) in the LCD menu # 2-1.

4-7. AUDIO INPUTS

Each audio inputs have a 3.5 mm jack connector and/or a 5-pins MCO connector.

• 3.5 mm jack connector

The COMPUTER 1, COMPUTER 2, C.VIDEO 1 and S.VIDEO 1 inputs are equipped with this audio connector. This

connector allows to connect only UNBALANCED audio source. Connect your UNBALANCED audio sources as

follow:

• 5-pins MCO female connector

The C.VIDEO 1, C.VIDEO 2, S.VIDEO 1, S.VIDEO 2, and RGB/YUV inputs are equipped with this connector. This

connector allows to connect BALANCED or UNBALANCED audio inputs. Connect your audio sources as follow:

4-8. AUDIO OUTPUTS

The audio output is provided with a RCA(x2) connectors and a 5-pins MCO female connector. The RCA connectors allow

to connect only UNBALANCED audio systems, and the 5-pins MCO female connector allows to connect BALANCED or

UNBALANCED audio systems.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 80 81

Sin comentarios

Analog-way Smart Fade - SMF251A Manual de usuario Pagina 12