Analog-way Scan Vision VHX II - VHX480 Manual de usuario descargar pdf (Pagina 6)

Chapter 2 : INSTALLATION SCAN VISION VHX II

™

PAGE 6

Chapter 2 :

INSTALLATION

IMPORTANT : Please read all of the safety instructions (pages 2 to 4) before starting.

• Table top mounting: The SCAN VISION VHX II

™

can be used directly on a table: the unit is equipped with 4 plastic

feet.

• Rack mounting: The SCAN VISION VHX II

™

is compatible with a 19” enclosure. Please follow the instructions

below to install the SCAN VISION VHX II

™

in a 19” rack.

c Remove the 4 front side screws of the SCAN VISION VHX II

™

and fix the 19" optional

brackets to the sides with the 4 screws.

d Place the SCAN VISION VHX II

™

onto the optional 19" tray and place them in your rack.

e Attach together the SCAN VISION VHX II

™

with the 19" tray to the rack by using 4 screws in

the front panel holes (screws are not included).

f Connect all of the cables to the SCAN VISION VHX II

™

and attach them to the rack with

some tie wraps, to prevent the weight of the cables to pull down on the rear of the SCAN

VISION VHX II

™

IMPORTANT: • Be sure that no weight is added onto the SCAN VISION VHX II

™

• The maximum ambient operating temperature must not exceed 40 °C (104 °F).

• The rack and all mounted equipment in it must be reliably grounded to national and local

electrical codes.

(

tional

)

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Sin comentarios

Analog-way Scan Vision VHX II - VHX480 Manual de usuario Pagina 6