Analog-way Eikos2 Manual de usuario descargar pdf (Pagina 30)

7.2.2 Audio





This mode turns your Eikos² into a true 10 x 2 scaled matrix, while preserving seamless switching capabilies.

Program 1 and Program 2 outputs can be set to dierent resoluons and rates. Switching between any of the

inputs can be done with the various eects (Cut, Fade, Slides…) and synchronized on both outputs.

This mode allows to display up to four live windows, while preserving seamless switching capabilies (not if

all 4 layers are displayed). Several templates are available.

In this secon, you will setup the audio of your device, you have several modes. In all modes, you have the

possibility to output the audio in AES3 or SPDIF:

NO AUDIO: the audio of your device is switched o

PRESET MODE: the standard mode of use of the device

You have two possibilies:

• Top layer: the sound on the output will follow the audio input of the top

layer.

• Breakaway: when breakaway is acvated, the audio on the output is

memorized into the preset. A change of preset, changes the audio on the

output. A change of content into a video layer has no eect on the audio.

ROUTING MODE: in this conguraon, simply choose an audio input to

assign it to the output. The audio conguraon remains the same during

the show.

In this example input1 is on out1 and input 2 is on out 2

7.2.2 Audio

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 105 106

Sin comentarios

Analog-way Eikos2 Manual de usuario Pagina 30