Analog-way Trans-Scaler XT - TSC550 Manual de usuario descargar pdf (Pagina 10)

Chapter 4 : STARTING TRANS-SCALER XT™

PAGE 10

4-5. COMPONENT VIDEO INPUT

The Component Video signal, also called YUV (Y, R-Y, B-Y), or BETACAM

™

, is widely used in broadcasting and is

available on high-quality DVD players. The COMPONENT signal is transmitted on 3 coaxial cables, and also has a better

quality picture than COMPOSITE and S.VIDEO signals. The COMPONENT connectors are usually RCA (x3), or BNC

(x3) connectors.

CONNECTION

4-6. COMPUTER INPUT

This input is used to pass-through any High-Definition or Computer signals. The signal connected to this input is sent

directly to the display output. Also you may connect a Computer source (PC, MAC, WORKSTATION), or a high

definition source (progressive DVD player, HDTV). Use the VGA supplied cable (HD15 male/male) to connect a PC. For

the others sources you may need some adapters (not supplied).

4-7. DISPLAY OUTPUT

The TRANS-SCALER XT

™

is equipped with an HD15 female output connector. If your display device is equipped only

with 5 BNC input connectors : use an HD15 to BNC (x5) cable (please see connection schematic below).

The TRANS-SCALER XT

™

can provide an RGBHV (H & V Separate Sync.) or an RGBS (Composite Sync.) output

signal.

CONNECTION

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Sin comentarios

Analog-way Trans-Scaler XT - TSC550 Manual de usuario Pagina 10